Most travelers on passenger ships will probably never have the chance to see the impressive machinery needed to run the ship. To keep the machinery going, the ship needs different kinds of oils to work properly. However, fuel oil is not directly usable when delivered to the ship, because the water it contains must be removed first. This separation process would not work unless the oil viscosity was lowered using a SWEP brazed plate heat exchanger.
To separate the water from the oil without clogging the separator with sticky oil, the viscosity of the oil must first be lowered by heating it.
Compact brazed plate heat exchanger mounted before the separator
The manufacturer of the system is GEA-Westfalia Separatoren AG, one of the global leaders in mechanical separation and dairy systems. The group consists of more than 50 companies and is represented in over 60 countries.
A compact brazed plate heat exchanger is mounted before the separator, with oil in one circuit and condensing steam in the other. The oil processed in this application may be low-sulphur heavy fuel oil as well as lube oil.
SWEP offers many different brazed plate heat exchangers for this onboard application, from the very small 10-plate B5T to the larger 80-plate B120T. Multiple SWEP B633 brazed plate heat exchangers, the world’s largest brazed plate heat exchanger for this purpose, may be used at the cistern oil pumps to control the viscosity. All the various brazed plate heat exchangers meet the heating demands in a very compact envelope that enables them to fit into the machine room's confined spaces.
Since steam is involved in this system, some components are needed close to the brazed plate heat exchanger that are not necessary in a water-heated oil system.
The steam trap ensures that the uncondensed steam and non-condensable gases (e.g. carbon dioxide and air) leave the system after the brazed plate heat exchanger. If the steam trap does not work, these gases occupy a lot of space in the condensate pipe, which may lead to so-called water hammer. When water hammer occurs, a high-speed “water bullet” is formed that may fracture the condensate pipe or other downstream components.
If a vacuum occurs in the brazed plate heat exchanger, the vacuum breaker allows air into the unit to avoid the backflow of condensate into the brazed plate heat exchanger.
If the temperature of the oil becomes too high or too low, the temperature probe sends a signal to the regulation valve to throttle or open the steam flow.